[. . . ] Continuously adjustable browning control knob Connection to the mains supply The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds to the voltage marked on the rating label. This product complies with all binding CE labelling directives. Important safety instructions There is always a danger that bread may catch fire, e. g. [. . . ] When switching on the appliance for the first time, the toaster may emit a slight smell and a little smoke, but this will disappear after a short while. Ensure sufficient ventilation. Operation General information - Day-old, dry bread darkens faster than fresh bread. For brown bread, adjust the browning control to a higher setting than for toasting white bread. - Do not use slices which are too thick or too big, as they may become stuck in the toaster. In case of problems or malfunctions during use, and before cleaning, always remove the plug from the wall socket. - To remove a slice stuck in the toast slot, use a blunt wooden implement (eg a brush handle). - Variations in bread type, humidity content and thickness of the slices result in different degrees of browning. Before using for the first time - Clean the toaster thoroughly (see 5 Adjusting the degree of browning The desired degree of browning can be varied by turning the adjustable browning control knob. In the case of sliced bread specifically intended for toasting, we recommend a browning control setting of 3 to 4. Operation - After adjusting the browning control, insert the bread into the toast slot and press the operating lever down. - Once the desired degree of browning is reached, the toaster switches off automatically; the slices are ejected, and can be removed once the indicator lamp goes off. - Easy lift-out: to facilitate lifting the bread slices out, push the operating lever up. - To achieve regular browning when toasting several slices in succession, allow the toaster to cool down for 60 - 90 seconds after each cycle. The toasting time may be shortened as a result of fluctuations in the power supply. [. . . ] Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. [. . . ]